Installing The Speaker - Kramer Dolev 8 User Manual

5.4

Installing the Speaker

To install the speaker, do the following:
1. Connect one of the following inputs:



2. Set the volume on the Dolev 8 to 12 o'clock (0dB)
3. Connect the power.
4. Set the volume on the input source to the minimum.
5. Switch the Dolev 8 power on.
6. On the input source, increase the volume control slowly until the desired level
is achieved.
7. Adjust the high frequency response according to the room conditions:


8
An unbalanced input (for example, a computer sound card, portable
player or DVD/CD player – C-A35M/2RAM) to the UNBALANCED
INPUT RCA connector
A balanced input (for example, a professional mixer or audio interfaces)
to the BALANCED INPUT 6.35mm TRS connector
A balanced input (for example, a professional mixer or audio interfaces)
to the BALANCED INPUT XLR connector
A heavily dampened room requires raised high frequencies
A resonant room requires reduction of the high frequencies
Dolev 8 - Installing the Speaker