Related Manuals for Kramer SPK-WA511
Summary of Contents for Kramer SPK-WA511
-
Page 1: User Manual
K R A ME R E LE CT R O N IC S L T D . USER MANUAL MODEL: SPK-WA511 On-Wall Active Speakers P/N: 2900-300112 Rev 3... - Page 2 This page is intentionally left blank...
-
Page 3: Table Of Contents
Technical Specifications Figures Figure 1: Active On-Wall Speakers in a Home Theater Setup Figure 2: Active On-Wall Speakers in a Conference Room Setup Figure 3: SPK-WA511 Active Speaker Figure 4: Connecting the Active Speaker to the Passive Speaker SPK-WA511 – Contents... - Page 4 This page is intentionally left blank...
-
Page 5: Introduction
Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our... -
Page 6: Getting Started
Achieving the Best Performance To achieve the best performance: • Use only good quality connection cables (such as the Kramer BC-2S) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables) •... -
Page 7: Overview
• Auto-power shutoff The SPK-WA511 is enclosed in an ABS cabinet and can be mounted indoors on the wall, vertically or horizontally. The mounting brackets are made of hardened steel that attach to each speaker, letting you rotate each speaker to the left or right. -
Page 8: Figure 1: Active On-Wall Speakers In A Home Theater Setup
Figure 1: Active On-Wall Speakers in a Home Theater Setup Figure 2: Active On-Wall Speakers in a Conference Room Setup SPK-WA511 - Overview... -
Page 9: Defining The Spk-Wa511
Defining the SPK-WA511 This section defines the active SPK-WA511: Figure 3: SPK-WA511 Active Speaker SPK-WA511 - Defining the SPK-WA511... - Page 10 10 minutes LOOP OUTPUT 3.5mm Mini Jack Connect to another pair of active speakers Connector SUB OUT 3.5mm Mini Connector If required, connect an active sub-woofer to this output for maximum bass reproduction SPK-WA511 - Defining the SPK-WA511...
-
Page 11: Installing The Speakers
1. Connect the + and - stereo sockets of the active speaker to the + and - stereo sockets of the passive speaker using the cable supplied, as follows: Passive Speaker (R) Active Speaker (L) Figure 4: Connecting the Active Speaker to the Passive Speaker SPK-WA511 - Installing the Speakers... - Page 12 Mark the location of the mounting holes Screw the mounting screws (not included in the package) into the mounting holes Slide the mounting bracket over the mounting screws so that the mounting bracket is secured to the surface SPK-WA511 - Installing the Speakers...
-
Page 13: Technical Specifications
3m (9.84ft) power cord, 4m (13.12ft) loudspeaker cable and a 2m (6.6ft) 3.5mm to 2 RCA cable COLORS: Available in white or black Specifications are within a 10% tolerance and are subject to change without notice at http://www.kramerelectronics.com SPK-WA511 - Technical Specifications... - Page 15 This page is intentionally left blank...
- Page 16 For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...
Need help?
Do you have a question about the SPK-WA511 and is the answer not in the manual?
Questions and answers