Table of Contents
Advertisement
Quick Reference Guide
4. When the following screen appears, click Next.
Refer to the User's Manual which is included on the CD for the setup instructions in detail.
4.2 Getting Started
Running Services
When the federation service installed, the service runs automatically. You can
also start or stop running the service manually. Go to the Start Menu in the
federation server → Click iNEX → Run the Service Manager program.
Log In
You are required to log in to the federation service when running the Setup and Client program.
Go to the Start Menu in the federation server → Click iNEX → Run the iNEX Setup or iNEX Client program
and enter login information.
20
Check the status of the service. If the service is not
listed as Working under Status, start the service
manually.
Advertisement
Table of Contents
