Playing Other Disc Mode; Switching Display For Discs - Kenwood DPX-6020 Instruction Manual

• Do not apply excessive force to the front panel after it slides.
• Do not use the unit with the front panel in the slid condition.
Doing so will cause breakdown.
NOTE
When you load a CD and eject it right away, the next time you try
to insert the CD may not load. In such a situation, take the CD out
for a moment and then reinsert it.

Playing Other Disc mode

This function permits the connection of optional players and
the playing of discs other than the loaded CD (in the current
unit).
Playing Discs:
Press the SRC button repeatedly to select the external disc
control mode.
The disc will start playing.
NOTE
The external disc control mode will differ, depending on the unit
that is connected.
Mode Display Examples
• "DISC/CD/MD-CH"...when a disc changer is connected
• "DISC/CD/MD-CH1", "DISC/CD/MD-CH2"...when two disc
changers are connected
Pausing and Restarting Disc Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
NOTE
When one disc has finished playing its last track, the next disc in
the changer will start playing. When the last disc in the changer
has finished, the player will return to the first disc and start
playing it.

Switching Display for Discs

Switch the display that appears while discs are playing.
Switching Display for Discs:
Each time you press the DISP button, the display during disc play
switches as follows.
"P-Time" (Track playing time)
"A-Time" (Total disc playing time (CD only))
"DNPS" (Disc name)
"Disc title" (Units featuring CD text/MD only)
"Track title" (Units featuring CD text/MD only)
"Character"
"Clock"
NOTE
• You can give names to discs through the presetting disc name
function (see p.22), depending on the unit.
Note that depending on the unit, display may not be possible.
• If you try to display the name of a disc that does not have one,
"No Name" is displayed instead.
• When there is an attempt to display the title of a disc for which
the disc title/track title has not been recorded, "No Text" is
displayed for CD and "No Title" is displayed for MD.
• Depending on the type of characters of the CD text, some
characters may not be displayed.
— 17 —