Preset Tuning; Clean Reception System Circuit (Crsc); Switching Display For Tuner; Direct Access Tuning (Function Of Remote Control) - Kenwood DPX-6020 Instruction Manual

Tuner features

Preset Tuning

You can recall a station being preset in preset station buttons
(#1-6).
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.

Clean Reception System Circuit (CRSC)

Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
The indicator lights up when CRSC is off.
Turning CRSC On/Off:
Press the CRSC button for at least one second to turn the
function on/off.
NOTE
Strong electrical fields (such as from power lines) may cause
unstable sound quality when CRSC is turned on. In such a
situation, turn it off.

Switching Display for Tuner

You can change the display used when listening to the radio.
Changing the Display:
Each time you press the DISP button, the display changes as
follows:
Station frequency
"SNPS"
"Character"
"Clock"
Direct Access Tuning
When you know the frequency of the station that you want to
listen to, you can input it directly for quick access.
1
Select the band by pressing the FM or AM button.
2
Press the DIRECT button.
"----" is displayed for 10 seconds.
If you make no input in the 10-second period, direct access
tuning is automatically cancelled.
3
Enter the frequency of the desired station.
If you want to listen to an FM station at 92.1 MHz, for example,
press 9, 2, and 1.
If you want to listen to an AM station at 810 kHz, for example,
press 8, 1, and 0.
NOTE
You cannot enter frequencies above or below what a band can
receive.
Cancelling Direct Access Tuning:
Press the DIRECT button again.
— 10 —
(
Function of remote control)