Resetting Printer To Factory Defaults - Argox Smart CP-2140 User Manual

Resetting Printer to Factory Defaults

Follow the steps below to reset printer to default settings:
1. Turn on the printer and wait for 5 or more seconds.
2. Press the "FEED" button for 10 seconds, and the "Ready"
indicator and "Power" indicator will go off in order.
3. Once "Power" indicator becomes lit again, release the FEED
button.
4. "Ready" indicator will then become lit, too. At this moment,
the printer has resumed its factory default settings.
Note:
The printer factory default settings are stored in printer‟s flash;
these settings remain stored, without being erased even the printer
power is disconnected.
www.meteorbarcode.it - info@meteorbarcode.it
29