Argox Smart CP-2140 User Manual page 35

LED Indicators: Only the Ready LED blinks
Power LED
ON
ON
Possible Problems
Print head needs to
cool down
Printer head module
unlatched
Printer is in
PAUSE status
Printer is receiving data
www.meteorbarcode.it - info@meteorbarcode.it
Ready LED
ON
OFF
Printing will stop until the print head cools to
normal printing temperature.
Once it completes, the printer will
automatically resume the printing tasks sent
previously.
Close the printer module and then press
firmly at both the left and the right of printer
module to properly latch.
Press FEED button to resume printing.
As soon as all the data has been received,
Ready LED will stay solid green and
automatically resume normal operation.
Solutions
35