Ethernet 10/100 Internal Printer Server Option; Ethernet Module Status Indicators - Argox Smart CP-2140 User Manual

3. Do not tie the data cables to power wire conduits.

Ethernet 10/100 Internal Printer Server Option

This connector is for Ethernet application; it is convenient to use
several printers by Ethernet connector at the same time.
Note:
When using Ethernet model printer, please wait till the Ready
Indicator to stop blinking, before starting printer operations.

Ethernet Module Status Indicators

LED Status
Both Off
Blinking
Green
Amber
CP-2140E Ethernet LED Indicators:
Green LED
www.meteorbarcode.it - info@meteorbarcode.it
No Ethernet link detected.
The printer waits for printer ready.
It will take about 20 seconds to be ready.
Speed LED
Link/Activity LED
Description
On: 100 Mbps link
Off: 10 Mbps link
On: link up
Off: link down
Flash: activity
Amber LED
40