Resetting To Factory Default Settings - Argox G Series User Manual

Resetting to Factory Default Settings

If you would like to reset the printer to its factory defaults after
certain commands have been sent or settings changed:
1. Turn off the printer.
2. Press and hold the CANCEL button, and turn on the
power.
3. When the message " E2PROM RESET..." is displayed on
the LCD and READY indicator blinks, release the button.
4. Finally the "READY" message is displayed and the
READY indicator stops blinking and lights up.
5. The following parameters automatically reset.
- Label parameters
- Heat (Darkness)
- Speed
- Symbol set (language)
- Others for specific emulation
Notes:
1. All settings stored in non-volatile E2PROM cannot be
destroyed even by turning the printer off.
2. The settings of DIP switch cannot be reset.
3. It is necessary to perform label sensitivity calibration after
resetting.
4. The printed label count cannot be reset.
42