Deck Hardware; Anchor Windlass (If Equipped) - Bayliner 265 Owner's Manual

265 • Owner's Manual Supplement

Deck Hardware

FORWARD DECK HARDWARE
FWD
NAVIGATION BOW
LIGHT (TYPICAL) CLEAT

Anchor Windlass (If Equipped)

Your boat may feature an anchor
windlass. Read the manufacturer's
instruction manual supplied in your
boat's owner's packet before using
the anchor windlass for the first time.
• The windlass can be controlled from
a switch at the helm or from the deck
switches (see illustration to right).
• Make sure that the windlass breaker,
located under the aft cockpit enter-
tainment center sink, is turned On
before using the anchor windlass.
• To haul the anchor, use engine power
(not the windlass) to move the boat
to, and directly above, the anchor.
• Use the windlass to disengage the
anchor from the bottom by pulling
it straight up.
PRODUCT DAMAGE HAZARD!
Do not pull the boat to the anchor using the windlass or continue to use the windlass if it has stalled or
is overloaded.
ANCHOR ROPE CHOCK
ROLLER (TYPICAL)
WINDLASS "DOWN"
SWITCH
WINDLASS
!
CAUTION!
AFT DECK HARDWARE
AFT
WATER GRAB
FILL HANDLES
VIEW OF FORWARD DECK
ANCHOR
ROPE
CHOCK
ANCHOR ROLLER
Chapter 2: Features / Systems
WASTE DECK FUEL
PUMP-OUT CLEAT FILL
FITTING (TYPICAL)
FWD
WINDLASS "UP"
SWITCH
NAVIGATIONAL
LIGHT
11