Controls; Power Trim And Tilt; Trim Tabs - Bayliner 265 Owner's Manual

Hide thumbs Also See for 265:
Table of Contents

Advertisement

Chapter 2: Features / Systems

Controls

Power Trim and Tilt

The stern drive on your boat
is equipped with power trim
and tilt.
Trim and tilt instructions are
provided in the engine opera-
tion manual and the shifter/
throttle manual, included in
your owner's packet.

Trim Tabs

LOSS OF CONTROL HAZARD!
• Improper use of trim tabs may cause loss of control! DO NOT use trim tabs in a following
sea as they may cause broaching or other unsafe handling characteristics.
• NEVER allow anyone unfamiliar with trim tabs to operate them.
• DO NOT use trim tabs to compensate for excessive unequal weight distribution.
The trim tabs may be used to help keep your boat level at cruising speeds.
The trim tabs are controlled by two rocker switches at the helm. Before using the trim tabs read and understand the
trim tab operation manual included in your boat's owner's packet.
Observe the following:
• Once cruising speed is reached, the port or starboard trim switch may be used (one at a time) to level the boat.
Perform trim tab adjustment with several short touches to the switch rather than one long one. After each short
touch allow several seconds for the hull to react.
• The trim tab hydraulic fluid reservoir is located in the engine compartment. The fluid level must be checked
periodically (at least once a year) and refilled as necessary.
26
SHIFT/THROTTLE
CABLES
!
WARNING!
TRIM TAB ROCKER SWITCHES
TRIM TAB
COMPONENTS
TRANSOM
TRIM TAB
(TYPICAL)
265 • Owner's Manual Supplement
STEERING
CABLE
SHIFT/THROTTLE
LEVER

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents