Flash Code On Mil Indicator - Briggs & Stratton Vanguard 430000 User Manual

Fault Code on MIL Indicator
The MIL will display sequences of flashes that
indicate a fault within the EFI system.
The number of flashes represents the number of the
code.
For example, if there was an issue with battery
voltage, the fault code 24 would be displayed on the
MIL.This is represented by two long flashes
followed by four short flashes, as shown below.
If more than one fault condition has occurred, a two-
10
second pause will occur between each of the code
flashes.
91