Audio Adjustments; Audio Control; Audio Setup - Kenwood eXcelon KDC-X993 Instruction Manual

Audio Adjustments

Audio Control

You can adjust following Audio Control items;
Adjustment Item Display
Rear volume "REAR VOLUME"
Subwoofer level "SUBWOOFER LEVEL" –15 — +15
Balance "BALANCE"
Fader "FADER"
Exit Audio Control mode (Volume control mode)
1
Enter Audio Control mode
Press the [AUD] knob.
2
Select the Audio item to adjust
Press the [AUD] knob.
3
Adjust the Audio item
Turn the [AUD] knob.
4
Exit Audio Control mode
Press any button.
Press a button other than the [AUD] knob or [0]
button.
28
|
KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

Audio Setup

You can set Sound system , such as follows;
Range
0 — 35
Left 15 — Right 15
Rear 15 — Front 15
1
2
3
4
5
Adjustment Item Display
Volume offset "VOL-OFFSET" –8 — ±0 (AUX: -8— +8)
Dual Zone System "2 ZONE"
⁄
• Volume offset: Sets each source's volume as a difference
from the basic volume.
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by "ZONE2" of
<Function Control> (page 6).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by [AUD] knob.
- Adjust the volume of Rear channel by <Audio Control>
(page 28) or [5]/[∞] button on the remote control
(page 43).
- The Audio Control has no effect on sub source.
Select the source to adjust
Press the [SRC] button.
Enter Audio Setup mode
Press the [AUD] knob for at least 1 second.
Select the Audio Setup item to adjust
Press the [AUD] knob.
Adjust the Audio setup item
Turn the [AUD] knob.
Exit Audio Setup mode
Press the [AUD] knob for at least 1 second.
Range
OFF/ON