Make A Voice Dialing Call; Registering To The Preset Dial Number List; Display Of Phone Number Type (Category) - Kenwood eXcelon KDC-X993 Instruction Manual

Make a voice dialing call

1
Enter voice recognize mode
>
Select "BT" "Voice Recognize".
For how to select Function Control item, refer to
<Function Control> (page 6).
"Ready" is displayed.
2
Press the Control knob.
"PB Name?" is displayed.
When a beep is heard, utter the name within 2
second.
3
"PN Type" is displayed.
When a beep is heard, utter the category within 2
second.
4
Make a call
Press the Control knob for at least 1 second.
• This step is the same as step 3 of the procedure in
<Calling a number in the Phone Book>. You can make a
call or select a category.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the Control knob allows you to retry
voice input. (page 54)
• Both the name and category requires registration of a
voice tag. (page 39)
• Audio sound is not output during voice recognize.
Registering to the Preset Dial Number
List
1
Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2
Enter Preset Memory mode
Press the [ ] button.
3
Select the number to put in the memory
Turn the Control knob or push it towards up or
down.
4
Determine the number to put in the memory
Press the Control knob for at least 1 second.
Exit the Preset Memory mode
Press the [ ] button.
Display of phone number type
(category)
The category items in the Phone Book are displayed
as follows:
Display
"GENERAL" / " "
"HOME" / " "
"OFFICE" / " "
"MOBILE" / " "
"OTHER" / " "
Information
General
Home
Office
Mobile
Other
|
English
23