Kenwood eXcelon KDC-X993 Instruction Manual page 8

Function Control
Category Item
"SP Select"*
"Call Beep"*
"BT F/W Update"*
"Beep"
"Clock Adjust"
"Date Adjust"
"Date Mode"
"SYNC"
"DSI"
"Illumi DIM"
"ILM Effect"**
"ILM MSC SYNC"
"Display"
"DISP DIM"
"Contrast"
"DISP N/P"
"AMP"
"Zone2"
"AMS Control"**
"TI"**
"CRSC"***
"Receive Mode"
"Tag Memory"
"Tagging"
"ESN="
"Name Set"
"Scroll"
"Favorite Delete"
"Built in AUX"
"CD Read"
"DEMO Mode"
8
|
KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Setting Entry Setting overview
"Front"*/ Specify the voice output speaker.
"F-R"/ "F-L"
"ON"*/ "OFF" Output a beep from the speaker when a call comes in.
— Display the firmware version and update the firmware.
1 sec.
"OFF"/ "ON"* Setting the operation check sound (beep sound) ON/
OFF.
— 1 sec. Sets the clock.
— Sets the date.
1 sec.
7 types Sets the date display mode.
1 sec.
"OFF"*/ "ON" Synchronizing the RDS station time data and this unit's
clock.
"OFF"/ "ON"* DSI (Disabled System Indicator) of the unit blinks when
the faceplate is removed.
"OFF"/ "AUTO"* Sets whether the illumination is dimmed in conjunction
/ "MNAL1" / with the light switch of the vehicle or it is dimmed
"MNAL2" constantly.
"OFF"/ "ON"* Sets whether the key illumination color (KDC-X993/
KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U)
is changed in conjunction with the key operation.
"OFF"*/ "ON" Sets whether the key illumination color (KDC-X993/
KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U)
is changed in conjunction with the sound volume.
"OFF"/ "ON"* Turns off the display when no operation is performed.
"OFF"/ "AUTO"* Dims the display part in conjunction with the light
/ "MNAL1" / switch of the vehicle.
"MNAL2"
"1" - "10" Adjusting the display contrast.
"POSI1"/ "2" Switches the panel display between positive or
/ "NEGA1"/ "2" negative.
"OFF"/ "ON"* Turns on/off the built-in amplifier.
"REAR"*/ Specifies the destination of AUX input sound when the
"FRONT" Dual Zone function is turned on.
— Controls the connected LX amplifier.
"OFF"*/ "ON" Switches to the traffic information automatically when
the traffic bulletin starts.
"OFF"/ "ON"* Switches to Monaural to decrease noise when
reception is poor.
"AUTO"*/ Sets the receive mode of HD Radio.
"DIGITAL"/ 1 sec.
"ANALOG"
"00"- "50" Displays the tag memory usage of HD Radio. Up to 50
tags can be registered to this unit.
"0FF"/ "ON"* Turns ON / OFF the tag memory function of HD Radio.
— Displays the Electronic Serial Number of satellite radio.
— Sets the display when switched to AUX source.
1 sec.
"Auto"*/ Specifies whether the text is scrolled automatically.
"Manual"
— Deletes Favorite Preset Memory.
1 sec.
"OFF"*/ "ON" Sets whether to display AUX during source selection.
"1"*/ "2" Sets the CD read mode.
"OFF"/ "ON"* 2 sec. Specifies whether to enable demonstration.
Condition Page
*
*
38
—
— 26
26
26
—
—
*
—
— —
— *
*
—
*
*
*
— 26
—
—
*
19
19
—
12
— —
34
—
*
— 27