Hypertherm Powermax 85 Service Manual page 213

85A CE
When securing a component to the heat sink, gently tighten all screws and then tighten all screws to the required
torque.
Note: All screws listed are Phillips head, pan head, machine screws.
1
Torque to 15 in-lbs (17.3 kg cm).
M4 X 10 2SEM
2
Torque to 20 in-lbs (23 kg cm).
M5 X 16 2SEM
3
Torque to 35 in-lbs (40 kg cm).
M6 X 16-12.5 2SEM TRI CHRM
Note: "3" on the left
3
3
1
powermax
65/85 Service Manual
3
COMPONENT REPLACEMENT
2
6-33