SECTION 9 –
FURNITURE AND SOFTGOODS
Table Leg
Catch
3. Remove the table from the wall support
bracket by lifting the end of the table.
4. Then lower the table to rest on the cleats
attached to each dinette bench.
5. Arrange dinette cushions to cover bed area.
NOTE: Additional bolsters may be included with
your dinette to cover bed area.
9-4
Wall
Support
Table
Bracket
Reverse steps to convert back into dinette
seating.
Once the table is reattached onto the wall
support, make sure the table leg is secured into
the floor support bracket and the leg brace is
locked.
Floor
Support
Bracket
DINETTE/BED CONVERSION -
DREAM DINETTE
–If Equipped
(Typical View – Your coach may differ in
appearance)
Dinette to Bed
1. Release the lock rod on the bottom of the
dinette table by pulling down.
™