Table of Contents
Advertisement
SECTION 8 –
ENTERTAINMENT
AUDIO-VIDEO SYSTEM BASIC
OPERATION
NOTE: For your convenience, we have also
included a handy, tear-out version of this
"A/V System Basic Operation" guide in
Section 8 of your Operator's Manual
Supplement.
See your InfoCase for specific operating
guides for audio and video components.
DVD HOME THEATER SYSTEM
–If Equipped
The available DVD home theater system
operates from 120-volt AC household current
only, so you must have either the shoreline
connected, the generator running, or the inverter
turned on (if equipped).
The TV is connected to the home theater
system, which plays through theater speakers in
the lounge area of the coach.
Set TV Video Input
•
Turn TV and DVD player ON.
•
Press FUNCTION
button on front of TV or
remote and select
HDMI1 input.
TV screen will display
DVD player logo when
correct input is selected.
Play DVD with Theater Sound
•
Insert DVD into player. DVD will begin to
load automatically. TV screen will typically
show "READING" or "LOADING".
•
DVD may load directly to
main title/menu screen or it
may begin to play previews.
You may be able to skip previews if desired by
pressing the PRESET+ button until you see
the main menu screen.
8-4
•
When main menu screen
appears, use arrow buttons on
remote to select desired entry
or press the center button on
remote (or "Play" button on
DVD player) to begin playing feature.
•
Volume is adjusted with remote (or volume
buttons on DVD player).
TV Sound Through Home Theater
Speakers
When watching TV programs alone, the TV
normally plays sound through its own built-in
stereo speakers. If you wish to connect TV stereo
sound output to the home theater speakers for a
richer sound quality, follow these steps:
•
Turn TV and DVD player ON.
•
Press FUNCTION button on DVD player or
remote to set DVD player to TV CABLE.
•
Use TV Menu button to set TV audio output to
"Variable Audio Output". This routes TV
stereo sound output through home theater
system.
> Audio (turn speaker Off)
> Setup (change to Variable)
•
Select TV channels and adjust volume with
remote for either the TV or DVD.
NOTE: Turn the volume level up significantly on
the DVD player when using the home
theater as an amp for the TV through the
stereo system.
DVD PLAYER
(Without Home Theater)
–If Equipped
Advertisement
Table of Contents
