Using The Quick Oil Drain System - Maxum 3100 SE Sport Cruiser Owner's Manual

Chapter 3: Propulsion & Related Systems
8. Repeat steps 2 through 7 on the port engine's quick oil drain assembly. The only difference being; the bilge plug
assembly, unclipped in step 3, will be used in step 9.
At this point, both of the oil drain
hose cables should be hanging out of
the bilge drain.
9. Clip the bilge plug swivel clip to both of the oil
drain hose cables.
10. Push the oil drain hose cables and the bilge plug
swivel clip and cable into the bilge.
11. Screw the bilge plug into the bilge drain and
tighten firmly.

Using the Quick Oil Drain System

1. Remove your boat from the water.
2. Unscrew the bilge plug.
3. Pull the bilge plug cable out of the bilge drain
until the swivel clip and the oil drain hose cables
appear.
4. Unclip one of the oil drain hose cables from the
swivel clip. NOTE: Make sure the other drain
cable remains attached to the swivel clip.
5. Pull the unclipped hose cable until the oil drain
plug and the oil drain hose slide out of the bilge
drain.
6. Place the end of the oil drain hose into a suitable container.
7. Unscrew the oil drain plug and drain the engine oil.
8. Screw the oil drain plug back into the oil drain hose and tighten firmly.
9. Push the oil drain hose and oil drain plug back into the bilge.
10. Reclip the oil drain hose cable back onto the swivel clip.
11. Repeat steps 4 through 10 beginning with unclipping the other oil drain hose cable.
12. Push all of the cables back into the bilge and screw the bilge plug into the bilge drain and tighten firmly.
13. Dispose of the waste oil in accordance with local regulations.
32
OIL DRAIN HOSE CABLES
OIL DRAIN
HOSE CABLES
SWIVEL CLIP
BILGE PLUG
CABLE
BILGE PLUG