Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Qtx MITO
Summary of Contents for Qtx MITO
- Page 1 MITO Item ref: 152.766UK User Manual Mito RGB 1420mW RGB Effects Laser...
- Page 2 Thank you for choosing this QTX MITO high power laser. This high power effects laser offers a vast selection of patterns and grating effects including the popular "3D", "3D thread" and "galaxy" displays. The high precision pattern themes can be controlled via the 23 channel DMX-512 control.
-
Page 3: Installation
In the box: The MITO laser should arrive to you in a single carton. Please ensure the box is in perfect undamaged condition before accepting goods. You carton should contain the following: MITO laser unit 2 x IEC power leads (EU and UK) ... -
Page 4: Aerial View
Aerial view: Connecting: Use the included UK or EU mains lead to connect to the mains power supply. To wire directly to the mains, earth wiring must be connected for safety. Please refer to below colour coding for the correct wiring. Wire colour Connection International Symbol... -
Page 5: Maintenance
Fuse replacement: In the event of fuse failure always ensure the mains is switched off and the IEC connection is removed before opening the fuse cover. Remove the fuse from the fuse holder and replace with a new one. Always used the correct fuse rating stated on the unit. Place the fuse cover back in the keyed slot, ensuring you are placing it back the correct way. - Page 6 Mic sensitivity, adjust level appropriately to ambient sound level for ideal sound-to-light trace. Safety key switch. DMX signal indicator, flashes when DMX signal present. XLR socket for DMX signal in. XLR plug for DMX signal loop out. Dip switch to switch between auto, sound to light and DMX mode, also serves as DMX initial address setting.
- Page 7 DIP2 DIP3 DIP4 DIP5 DIP6 DIP7 DIP8 DIP9 value For example if DMX signal for MITO starts at channel 44, the DIP switch value need to be set as below: 4(DIP3) + 8(DIP4) + 32(DIP6) = 44 152.766UK User Manual...
- Page 8 The MITO can be controlled by DMX over 23 channels, below is the function indication for various DMX values in individual channels: *S2L – sound-to-light Channel Function value Black out Auto slide mode reduce pattern size to 50%@1 and 4, 25%@2 and 5, 12.5%@3 and 6...
- Page 9 0-63 Manual rotation CH4/CH15 (identical, ch4 64-191 Auto/S2L (control by ch1) 2 ways rotations controls pattern1, ch15 192-223 Auto/S2L (control by ch1) rotation clockwise controls pattern 2) 224-255 Auto/S2L (control by ch1) rotation anti-clockwise Manual warp/slide (control by ch1) around 0-63 vertical axis CH5/CH16 (identical, ch5...
- Page 10 ch22 controls pattern 2) 32-47 Laser colour to green 48-63 Laser colour to yellow 64-79 Laser colour to blue 80-95 Laser colour to purple 96-111 Laser colour to cyan 112-127 Laser colour to white (full power) 128-191 Uniform colour change 192-255 Graduate colour change by parts 0-31...
-
Page 11: Troubleshooting
Trouble shooting: Check mains power is connected correctly and mains cable is in good condition. No power output Check fuse is in working condition, if fuse continually blows stop use immediately and refer unit to qualified personnel. Check dip switch 10 is not switched on. Check key switch is switched on.