Fitting The Fl Ange Motor; Fit The Belt Guard Of The Fl Ange-Motor - Pfaff 918 Instruction Manual

8 Fitting the fl ange motor
.01.04
Fig. 8 - 04
● Loosen screws 1 and remove toothed belt wheel 2 from the motor shaft 3.
● Attach bearing plate 4 to the motor 5 with screws 6 as shown in Fig. 8-04.
● Slide toothed belt wheel 2 onto the motor shaft 3 and fasten with screws 1.
● Slightly tilt bearing plate 4 with motor 5 to the side and place the toothed belt 7 on the
toothed belt wheels.
● Align bearing plate 4 of motor 5 on the machine case and attach it with screws 8.
8 Fit the belt guard of the fl ange-motor
.01.05
3
2
Fig. 8 - 05
Installation and commissioning
7
3
2
1
8
6
4
1
● Attach belt guard 1 with screws 2 and 3.
5
21