Controls
7
Adjustment lever for zigzag stitch and needle position
.03
7
Reverse-feed key / Stitch length adjustment wheel
.04
16
L
3
Fig. 7 - 03
1
Fig. 7 - 04
● The zigzag stitch adjustment lever 1 is
4
● To change the position of the adjustment
M
R
● By turning the needle-position adjust-
1
2
● The machine sews in reverse as long as
● The stitch length can be adjusted by
● The stitch length setting can be read on
used for adjusting the width of the zig-
zag stitch.
lever, the locking lever 2 must be pressed
against the adjustment lever 1.
The current zigzag-stitch width
can be seen on scale 3.
ment lever 4 the required needle position
can be set.
L = needle-position left
M = needle-position center
R = needle-position right
the reverse-feed key 1 is pressed.
turning the stitch length adjustment
wheel 2.
scale 3.
2
3