3D View - Kenwood KNA-DV3100 Instruction Manual

2D/3D View
You can switch between a 2D and 3D display screen. You can also change the viewing angle of the
3D display.
Before Steps
1
2
To implement 3D display on the right side of a dual map, touch the top of
the right-hand screen and then select
3 (Navigation Set Up) 3
Select a 2D or 3D display for the Map Screen and the
Guidance Screen.
Map Screen:
Guidance Screen: Changes the route guidance screen, such as the
Select
In situations where 3D is selected on the Map
screen, it will be possible to modify the map
angle.
The view point will be higher up when closer to
, and lower down when closer to
(2D/3D View)
Changes the map screen display.
enlarged junction diagrams.
or on the angle indicator.
: Restores the initial default angle setting.
.
.
English 37