Display Route; Route Preview - Kenwood KNA-DV3100 Instruction Manual

Route Options

Display Route

Use this function to display the entire calculated route.
Before Steps
1
2

Route Preview

The mobile navigation system can show you an automated simulation of the calculated route.
Before Steps
1
The speed of the simulation run can be altered by changing the scale of the map.
The simulation run is faster with a wider area map and slower with a closer up map.
32 English
3 (Route Options) 3
Select
The Entire Route screen appears.
If the data for the route cannot be shown on one screen, you can
scroll using
Select
3 (Route Options) 3
Use the buttons displayed onscreen to carry out a
simulation run.
: Move to the start point.
: Carry out a simulation run in the direction of the start point.
: Stop the simulation run.
: Carry out a simulation run in the direction of the destination.
: Move to the destination.
: Displays the EDIT ROUTE PREVIEW screen. (see page 33)
(Display route)
.
: You can set any areas you want to avoid from the list of
street names.
: Recalculates the route.
and .
.
(Route Preview)
When the run has been started, this button will be displayed
as , and when selected, it will cause running to take place
at high speed.
When the run has been started, this button will be displayed
as , and when selected, it will cause running to take place
at high speed.