Camera Control; Switching The View Camera - Kenwood DNN9350BT Instruction Manual

Connected navigation system & monitor with dvd receiver
Hide thumbs Also See for DNN9350BT:
Table of Contents

Advertisement

Return to the Top page

Camera Control

ñ
C
amera Control
When a CMOS-3xx (optional accessory) is
connected, the camera can be controlled
from this unit.
Preparation
• [NAV/APPS Key Longer than 1 Second] must be
User interface
set to "CAM". See
Camera Control
You can adjust the camera angle of the
camera system and display of the guideline.
1
Press the <NAV>/ <APPS> button for 1
second.
Camera view screen appears.
2
Adjust each item as follows.
1
3
Guideline
1
Pressing each time turns on or off the
guideline display alternately.
Angle
2
Pressing each time changes camera angles in
the following order:
Super wide view/ Wide view/ Overhead view/
Wide view + Top view/ Corner view
3
Clearing the Camera View display.
108
(P.111).
DNR8035BT/
DNR8035BTM
2

Switching the View Camera

Switching between the front view camera
and the rear view camera.
1
Press the <NAV>/ <APPS> button for 1
second.
Camera view screen appears.
2
Touch illustrated area during Camera
view screen.
HOME
6
Switches between the front view camera
and rear view camera each time you touch
the illustrated area.
DNR8035BT/
DNR8035BTM
HO

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dnn9350btmDnr8035btDnr8035btm

Table of Contents