Setting The Conditions For Simulation Run - Kenwood KNA-DV3100 Instruction Manual

■ Setting the conditions for simulation run

Before Steps
3
1
IMPORTANT
Finish the simulation run before actually starting to drive. The simulation run will automatically finish when you actually start to
drive, but this can lead to an error in the display of the current position of your vehicle.
(Route Options) 3
Select .
EDIT ROUTE PREVIEW screen apppears.
:
Stops at the destination or the next way point.
:
Stops at a point of interest which has been setup on the route.
:
Delete the POI which has been selected.
POIs:
Displays the six POIs from Quick-POI storage. When one of these is
selected, it will be displayed on the map; furthermore,
can be selected to display items other than those shown here. For
more details, refer to page 36.
If, for example, Restaurant is selected for POIs and a simulation run
is started using
the route.
If is selected here, the system will display information relating
to the establishment in question.
(Route Preview)
, this will then stop at a restaurant on
English 33