Destination & Way Points; Addition Of Way Points - Kenwood KNA-DV3100 Instruction Manual

Destination & Way Points
The destination or way points used in route calculation can be changed using this function.

■ Addition of way points

The following procedure can be used to add new way points to the current route for calculation.
Before Steps
1
2
3
4
• When a new destination is set by
will be carried out once again.
• Step 3 is required when setting the 2nd way point and more after.
• Repeat step 1 and 3 until all desired way points have been set.
3 (Route Options) 3
Select
Set the way point using your preferred method.
When a new destination is set by
the current destination and route calculation will be carried out once
again.
When the required way points have been setup, indicate
the order in which they are to be visited.
Choose the location to be added, and then select
Select
(Destination), it will replace the current destination and route calculation
(Dest. & Way Pt.)
.
(Destination), it will replace
.
.
English 29