Camera Control; Switching The View Mode; Switching The View Camera - Kenwood DNX9990HD Quick Start Manual

Return to the Top page

Camera Control

C
amera Control
When a CMOS-310/CMOS-300 (optional
accessory) is connected, the camera can be
controlled from this unit.

Switching the View Mode

Camera system can display 5 kinds of view
mode.
1
Press the <AUD> button for 1 second.
Camera view screen appears.
2
Touch illustrated area during Camera
view screen.
View modes are switched each time you
touch the illustrated area.
76 76

Switching the View Camera

Swithing between the front view camera and
the rear view camera.
1
Press the <AUD> button for 1 second.
Camera view screen appears.
2
Touch illustrated area during Camera
view screen.
Switches between the front view camera
and rear view camera each time you
touch the illustrated area.
Return to the Top page
Camera Control
77