Premio Computer Athena System User Manual page 95

MS-6592 ATX Mainboard
95 OSR2 or a third-party IDE bus master driver). If your hard drive and your
system software both support Ultra DMA/33, Ultra DMA/66 or even Ultra
DMA/100, select Auto to enable BIOS support. Settings: Auto, Disabled.
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller
and you have USB peripherals. Settings: Enabled, Disabled.
USB Keyboard/Mouse Support
Set to Enabled if your need to use a USB keyboard/mouse in the operating
system that does not support or have any USB driver installed, such as DOS
and SCO Unix.
LAN Selection
The field determines whether the onboard LAN controller is activated. Set-
ting options: Enabled, Disabled.
Serial ATA Selection
The field determines whether the onboard Serial ATA controller is activated.
Setting options: Enabled, Disabled.
Onboard Sound Chip
The field determines whether the onboard audio controller is activated. Set-
ting options: Enabled, Disabled.
Onboard 1394 Selection
The field determines whether the onboard IEEE1394 controller is activated.
Setting options: Enabled, Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple
sector read/write. If your IDE hard drive supports block mode (most new
drives do), select Enabled for automatic detection of the optimal number of
block read/writes per sector the drive can support. Settings: Enabled, Disabled.
POWER ON Function
This controls how the PS/2 mouse or keyboard can power on the system.
Available settings are: Password, Hot KEY, BUTTON ONLY, Keyboard 98.
3-16