Connecting Wires To Terminals - Kenwood KDC-MP825 Instruction Manual

Connecting Wires to Terminals

AUX right input (Red) (KDC-MPV8025 only)
AUX left input (White) (KDC-MPV8025 only)
Rear right output (Red)/
Subwoofer right output (Red)
Rear left output (White)/
Subwoofer left output (White)
FM/AM antenna input
If no connections are made, do not let the
wire come out from the tab.
When using the optional power amplifier, connect to its
power control terminal.
Depending on what antenna you are using, connect either
to the control terminal of the motor antenna, or to the
power terminal for the booster amplifier of the film-type
antenna.
Connect to the terminal that is grounded when either the
telephone rings or during conversation.
Car fuse box
(Main fuse)
Battery
To car light control switch
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
Ignition key
switch
–
+
Fuse (10A)
Wiring harness
(Accessory1)
Power control wire (Blue/White)
P.CONT
ANT.
Motor antenna control wire (Blue)
CONT
TEL mute wire (Brown)
TEL MUTE
Dimmer control wire (Orange / White)
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
ACC
Car fuse box
Ground wire (Black) - (To car chassis)
Front right output (Red)
Front left output (White)
To KENWOOD disc changer/
Sirius satellite radio tuner/
External optional accessory
To connect these leads,
refer to the relevant
instruction manuals.
FRONT • L
FRONT • R
REAR • L
REAR • R
Ignition wire (Red)
Battery wire (Yellow)
English
39
|