Switching Preout; Built-In Amp Mute Setting; Sirius Id (Esn) Display; Crsc (Clean Reception System Circuit) - Kenwood KDC-MP825 Instruction Manual

Menu system
In Standby mode

Switching preout

Switching the preout between the rear and
subwoofer. (In subwoofer it outputs without
effect from the fader control.)
Display Setting
"SWPRE Rear" Rear preout.
"SWPRE Sub-W" Subwoofer preout.
In Standby mode

Built-in Amp Mute Setting

Toggles ON or OFF the mute control on the built-
in amplifier.
Turning ON this control enhances the preout
quality.
Display Setting
"AMP Mute OFF" The built-in amplifier activates.
"AMP Mute ON" The built-in amplifier deactivates.
In SIRIUS tuner source

SIRIUS ID (ESN) display

Displaying the SIRIUS ID (Electronic Serial
Number) display.
Display
"ESN = ************"
• Serial & SIRIUS ID (ESN)
It is especially important to retain the unit serial
number and the electronic SIRIUS Identification
number for service activation and potential future
service changes.
In FM reception
CRSC (Clean Reception System
Circuit)
Temporarily have reception switched from
stereo to mono to reduce multi-path noise when
listening to the FM station.
34
|
English
Display
"CRSC ON"
"CRSC OFF"
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned
ON. In such a situation, turn it OFF.

Text Scroll

Setting the displayed text scroll.
Display Setting
"Scroll Auto" Repeats scroll.
"Scroll MANU" Scrolls when the display changes.
• The text scrolled is shown below.
- CD text
- Folder name/ File name/ Song title/ Artist name/
Album name
- MD title
- Text for the SIRIUS tuner source, HD Radio source,
including Channel name, etc.
Function of the KDC-MPV8025

Built-in Auxiliary input Setting

Set the Built-in Auxiliary Input function.
Display Setting
"AUX OFF" When selecting the source there's no Auxiliary Input.
"AUX ON" When selecting the source there's Auxiliary Input.
In Standby mode

CD Read Setting

When there is a problem on playing a CD with
special format, this setting play the CD by force.
Display Setting
"CD READ 1" Play CD and MP3/WMA.
"CD READ 2" Play CD by force.
Setting
The CRSC is ON.
The CRSC is OFF.