Audio Adjustments; Bass/Middle/Treble Level; Audio Control; Adjusting The Detail Of Audio Control - Kenwood KDC-BT742U Instruction Manual

Audio Adjustments

Audio Control

You can adjust following Audio Control items ;
Adjustment Item Display
Rear volume "R-VOLUME"
Subwoofer level "SUB-W L"
Bass Boost* "B.BOOST"
System Q* "NATURAL"/"USER"/
"ROCK"/"POPS"/"EA
SY"/"TOP40"/"JAZZ"
/"GAME"
Bass level* "BASS L"
Middle level* "MID L"
Treble level* "TRE L"
Balance "BALANCE"
Fader "FADER"
Exit Audio Control mode (Volume control mode)
* Function of KDC-X493/MP442U.
⁄
• Source tone memory: You can set Bass, Middle, and
Treble for each source.
• "USER": The ranges selected lastly for Bass level, Middle
level, and Treble level are recalled automatically.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the [AUD] knob.
3
Select the Audio item to adjust
Press the [AUD] knob.
4
Adjust the Audio item
Turn the [AUD] knob.
5
Exit Audio Control mode
Press any button.
Press a button other than the [AUD] knob or [0]
button.
20
|
KDC-BT742U/ KDC-X493/ KDC-MP442U
Function of KDC-X493

Adjusting the detail of Audio Control

You can adjust the following Basic Audio Items in
Range
datail: Bass level, Middle level, and Treble leval.
0 — 35
–15 — +15
"STEP1"/"STEP2"/"OFF"
(The indicator turns on
according to the setting.)
Natural/User setting/Rock/
Pops/Easy/Top 40/Jazz/
Game
–8 — +8
–8 — +8
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15
1
2
3
4
5
Bass level
Adjustment Item Display
Bass Center Frequency "BASS F"
Bass Q Factor "BASS Q"
Bass Extend "BASS EXT"
Middle level
Adjustment Item Display
Middle Center Frequency "MID F"
Middle Q Factor "MID Q"
Treble level
Adjustment Item Display
Treble Center Frequency "TRE F"
Select the Basic Audio item
For how to select Basic Audio items, see <Audio
Control> (page 20).
Enter Detail adjustment mode of Audio
Control
Press the [AUD] knob for at least 1 second.
Select the Detail Audio item to adjust
Press the [AUD] knob.
Adjust the Detail Audio item
Turn the [AUD] knob.
Exit the Detail Audio Control mode
Press the [AUD] knob for at least 1 second.
⁄
• When you set the Bass Extend to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime by
pressing any button except for [AUD] knob or
button.
Range
40/50/60/70/80/100/
120/150 Hz
1.00/1.25/1.50/2.00
OFF/ON
Range
0.5/1.0/1.5/2.0 kHz
1.0/2.0
Range
10.0/12.5/15.0/17.5 kHz
[0]