Audio Adjustments (Dsp); Cabin Selection; Speaker Setting; Dta (Digital Time Alignment) Setting - Kenwood KDC-BT742U Instruction Manual

Function of KDC-BT742U

Audio Adjustments (DSP)

Cabin selection

You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types;
Car type
Not compensating.
Compact car
Full size car
Station wagon
Minivan
Sport-utility vehicle
Minivan Long
1
Enter Cabin select mode
Select "DSP" "SETUP"
>
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the car type
Turn the [AUD] knob and push the center when
the desired item is displayed.
3
Exit Cabin select mode
Press the [SEARCH] button.
⁄
• You can compensate the distances in more details by
using <DTA> (page 23) function.

Speaker Setting

Setting the speaker to be connected, speaker size,
and installation position;
Setting speaker Display
Front Speaker "LOCATION" "DOOR"/ "ON DASH"/
"FRONT" Location
Speaker "SIZE"
Size
Tweeter "TWEETER" "NONE"/ "USE"
Rear Speaker "LOCATION" • "DOOR"/ "REAR DECK"
"REAR" Location
Speaker "SIZE"
Size
Subwoofer Speaker "SIZE"
"SUB-W" Size
1
Enter Speaker Setting mode
Select "DSP" "SETUP"
>
For how to select Function Control item, refer to
<Function Control> (page 6).
Display
"OFF"
"COMPACT"
"F-SIZE"
"WAGON"
"MINIVAN"
"SUV"
"MV-LONG"
"CABIN".
>
Range
"UND DASH"
"SMALL" / "MEDIUM"/ "LARGE"
• "2ND ROW"/ "3RD ROW"
(Minivan/ Passenger van)
"NONE"/ "SMALL" / "MEDIUM"/
"LARGE"
"NONE"/ "SMALL" / "LARGE"
"SPEAKER".
>
2
Select the item you want to set
Turn the [AUD] knob and push the center when
the desired item is displayed.
3
Set the value
Turn the [AUD] knob and push the center when
the desired item is displayed.
4
Exit Speaker Setting mode
Press the [SEARCH] button.

DTA (Digital Time Alignment) setting

Adjusting fine tuning of the speaker position
compensation value specified at <Cabin selection>
(page 23).
1
Enter DTA setting mode
Select "DSP" "SETUP"
>
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the speaker you want to set
Setting speaker
Front speaker
Rear speaker
Subwoofer
Turn the [AUD] knob and push the center when
the desired item is displayed.
3
Set the compensation value of the speaker
position
Turn the [AUD] knob and push the center when
the desired value is displayed.
Adjust between 0 and 14.44 feet.
Refer to <Appendix> (page 38) on how to set the
compensation value.
4
Exit DTA setting mode
Press the [SEARCH] button.
"DTA".
>
Display
"FRONT"
"REAR"
"SUB-W"
23
|
English