Qss - TP-Link TL-WR740N User Manual

a). Choose menu "QSS", and you will see the next screen (shown in Figure 4-2 ).
Trạng thái QSS - Enable or disable the QSS function here.
Mã PIN hiện tại - The current value of the Router's PIN displayed here. The default PIN of
the Router can be found in the label or User Guide.
Khôi phục mã PIN - Restore the PIN of the Router to its default.
Tạo mã PIN mới - Click this button, and then you can get a new random value for the
Router's PIN. You can ensure the network security by generating a new PIN.
Thêm thiết bị - You can add the new device to the existing network manually by clicking this
button.
b). To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and Router using either Push Button Configuration (PBC)
method or PIN method.
Note:
To build a successful connection by QSS, you should also do the corresponding configuration of
the new device for QSS function meanwhile.
For the configuration of the new device, here takes the Wireless Adapter of our company for
example.
By PBC
I.
If the wireless adapter supports Wi-Fi Protected Setup (also called QSS) and the Push Button
Configuration (PBC) method, you can add it to the network by PBC with the following two
methods.
Method One:
Step 1. Press the QSS button on the front panel of the Router.
TL-WR740N
Figure 4-2 QSS
-18-
150Mbps Wireless N Router