Bảo Mật Không Dây - TP-Link TL-WR740N User Manual

Khảo sát - Click this button, you can search the AP which runs in the current channel.
•
Dạng mã - This option should be chosen according to the AP's security configuration. It
•
is recommended that the security type is the same as your AP's security type
Chỉ số WEP - This option should be chosen if the key type is WEP (ASCII) or WEP
•
(HEX).It indicates the index of the WEP key.
Dạng xác thực - This option should be chosen if the key type is WEP (ASCII) or WEP
•
(HEX).It indicates the authorization type of the Root AP.
Mật mã - If the AP your Router is going to connect needs password, you need to fill the
•
password in this blank.
4.6.2 Bảo mật không dây
Choose menu "Không dây→Bảo mật không dây", and then you can configure the security
settings of your wireless network.
There are five wireless security modes supported by the Router: WEP (Wired Equivalent Privacy),
WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access 2), WPA2-PSK (Pre-Shared Key)
and WPA-PSK (Pre-Shared Key).
Vô hiệu hóa bảo mật - If you do not want to use wireless security, select this check box, but
TL-WR740N
Figure 4-16
-38-
150Mbps Wireless N Router