Kiểm Soát Băng Thông; Cài Đặt Kiểm Soát Băng Thông - TP-Link TL-WR740N User Manual

Mạng đích - The Destination Network is the address of the network or host to which the static
route is assigned.
Subnet Mask - The Subnet Mask determines which portion of an IP address is the network
portion, and which portion is the host portion.
Gateway - This is the IP address of the gateway device that allows for contact between the
Router and the network or host.
Giao diện - This interface tells you either the Destination IP Address is on the LAN & WLAN
(internal wired and wireless networks), or on the WAN (Internet).
4.13 Kiểm soát băng thông
Figure 4-63 Bandwidth Control
There are two submenus under the Bandwidth Control menu as shown in Figure 4-63: Cài đặt
kiểm soát băng thông and Danh sách điều luật. Click any of them, and you will be able to
configure the corresponding function. The detailed explanations for each submenu are provided
below.
4.13.1 Cài đặt kiểm soát băng thông
Choose menu "Kiểm soát băng thông → Cài đặt kiểm soát băng thông", and then you can
configure the Egress Bandwidth and Ingress Bandwidth in the next screen. Their values you
configure should be less than 100000Kbps. For optimal control of the bandwidth, please select
the right Line Type and ask your ISP for the total bandwidth of the egress and ingress.
TL-WR740N
Figure 4-62 System Routing Table
-73-
150Mbps Wireless N Router