Quick Setup; Qss - TP-Link TL-WR743ND User Manual

Note:
If you select AP Router mode in Figure 3-6, the wireless status in Figure 4-2 will change, similar to
the figure below:

4.3 Quick Setup

Please refer to Section 3.2: "Quick Installation Guide."

4.4 QSS

This section will guide you to add a new wireless device to an existing network quickly by QSS
(Quick Secure Setup) function.
a). Choose menu "QSS", you will see the next screen (shown in Figure 4-3 ).
QSS Status - Enable or disable the QSS function here.
Current PIN - The current value of the Router's PIN is displayed here. The default PIN of the
Router can be found in the label or User Guide.
Restore PIN - Restore the PIN of the Router to its default.
TL-WR743ND 150Mbps Wireless AP/Client Router
Figure 4-3 QSS
- 21 -