Bảng Định Tuyến Hệ Thống - TP-Link TL-WR740N User Manual

2. Enter the following data:
Mạng đích - The Destination Network is the address of the network or host that you want
to assign to a static route.
Subnet Mask - The Subnet Mask determines which portion of an IP Address is the
network portion, and which portion is the host portion.
Gateway mặc định - This is the IP Address of the gateway device that allows for contact
between the Router and the network or host.
3. Select Đã kích hoạt or Đã vô hiệu hóa for this entry on the Trạng thái drop-down list.
4. Click the Lưu button to make the entry take effect.
Other configurations for the entries:
Click the Xóa button to delete the entry.
Click the Kích hoạt tất cả button to enable all the entries.
Click the Vô hiệu hóa tất cả button to disable all the entries.
Click the Xóa tất cả button to delete all the entries.
Click the Trước button to view the information in the previous screen, click the Tiếp button to
view the information in the next screen.
4.12.2 Bảng định tuyến hệ thống
Choose menu "Định tuyến nâng cao → Bảng định tuyến hệ thống", and then you can view the
System Routing Table in the next screen (shown in Figure 4-62). System routing table views all of
the valid route entries in use. The Destination IP address, Subnet Mask, Gateway, and Interface
will be displayed for each entry.
Figure 4-61 Add or Modify a Static Route Entry
-72-
TL-WR740N 150Mbps Wireless N Router