TP-Link TL-WR740N User Manual page 47

Note:
If you check the WPA/WPA2 radio button and choose TKIP encryption, you will find a
notice in red as shown in Figure 4-18
• IP Server Radius - Enter the IP address of the Radius Server.
• Cổng Radius - Enter the port that radius service used.
• Mật mã Radius - Enter the password for the Radius Server.
• Thời gian cập nhật mã nhóm- Specify the group key update interval in seconds. The
value should be 30 or above. Enter 0 to disable the update.
WPA-PSK/WPA2-PSK - It's the WPA/WPA2 authentication type based on pre-shared
passphrase.
• Phiên bản - you can choose the version of the WPA-PSK security on the drop-down list.
The default setting is Tự động, which can select WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
• Mã hóa - When WPA-PSK or WPA is set as the Authentication Type, you can select either
Tự động, or TKIP or AES as Encryption.
Note:
If you check the WPA-PSK/WPA2-PSK
find a notice in red as shown in
• Mật mã - You can enter ASCII characters between 8 and 63 characters or 8 to 64
Hexadecimal characters.
TL-WR740N
Figure 4-18
radio button and choose TKIP encryption, you will
Figure 4-19.
Figure 4-19
-40-
150Mbps Wireless N Router