TP-Link TL-WR740N User Manual page 18

The Router provides Phát hiện tự động function and supports three popular ways PPPoE,
IP Động and IP Tĩnh to connect to the Internet. It's recommended that you make use of the
Phát hiện tự động function. If you are sure of what kind of connection type your ISP
provides, you can select the very type and click Tiếp to go on configuring.
4. If you select Phát hiện tự động, the Router will automatically detect the connection type your
ISP provides. Make sure the cable is securely plugged into the WAN port before detection.
The appropriate configuration page will be displayed when an active Internet service is
successfully detected by the Router.
If the connection type detected is PPPoE, the next screen will appear as shown in
Figure 3-7.
Tên đăng nhập and Mật mã - Enter the Tên đăng nhập and Mật mã provided by your
ISP. These fields are case sensitive. If you have difficulty with this process, please
contact your ISP.
Mật mã xác nhận - Re-enter the password provided by your ISP to ensure the Password
you entered is correct. If the Password is different from the Confirm Password, the
screen will appear as shown below. Click OK, and re-enter the Password and Confirm
Password.
Figure 3-6 Choose WAN Connection Type
Figure 3-7 Quick Setup – PPPoE
-11-
TL-WR740N 150Mbps Wireless N Router