TP-Link TL-WR740N User Manual page 35

attempt to access the Internet again. If you want your Internet connection keeps active all the
time, please enter "0" in the Thời gian nghỉ tối đa field. Otherwise, enter the number of
minutes you want to have elapsed before your Internet access disconnects.
Kết nối tự động - The connection can be re-established automatically when it was down.
Kết nối dựa trên thời gian - The connection will only be established in the period from the
start time to the end time (both are in HH:MM format).
Note:
Only when you have configured the system time on Công cụ hệ thống -> Cài đặt thời gian
page, will the Time-based Connecting function can take effect.
Kết nối thủ công - You can click the Kết nối/ Ngắt kết nối button to connect/disconnect
immediately. This mode also supports the Thời gian nghỉ tối đa function as Kết nối theo
yêu cầu mode. The Internet connection can be disconnected automatically after a specified
inactivity period and re-established when you attempt to access the Internet again.
Caution: Sometimes the connection cannot be terminated although you specify a time to Max Idle
Time, since some applications are visiting the Internet continually in the background.
If you want to do some advanced configurations, please click the Nâng cao button, and the page
shown in Figure 4-8 will then appear:
Kích thước MTU (đơn vị byte) - The default MTU size is "1480" bytes, which is usually fine.
It is not recommended that you change the default Kích thước MTU (đơn vị byte) unless
required by your ISP.
Tên dịch vụ/Tên điểm truy cập - The service name and AC (Access Concentrator) name,
TL-WR740N
Figure 4-8 PPPoE Advanced Settings
-28-
150Mbps Wireless N Router