Mạng; Wan - TP-Link TL-WR740N User Manual

4.5 Mạng
Figure 4-4 the Network menu
There are three submenus under the Network menu (shown in Figure 4-4 ): WAN, LAN and Bản
sao MAC. Click any of them, and you will be able to configure the corresponding function.
4.5.1

WAN

Choose menu "Mạng→WAN", and then you can configure the IP parameters of the WAN on the
screen below.
1. If your ISP provides the DHCP service, please choose IP động type, and the Router will
automatically get IP parameters from your ISP. You can see the page as follows (Figure
4-5):
This page displays the WAN IP parameters assigned dynamically by your ISP, including IP
address, Subnet Mask, Default Gateway, etc. Click the Làm mới button to renew the IP
parameters from your ISP. Click the Giải phóng button to release the IP parameters.
TL-WR740N
Figure 4-5 WAN - Dynamic IP
-25-
150Mbps Wireless N Router