TP-Link TL-WR740N User Manual page 58

Cồng kích hoạt - The port for outgoing traffic. An outgoing connection using this port will
trigger this rule.
Giao thức kích hoạt - The protocol used for Trigger Ports, either TCP, UDP, or Tất cả (all
protocols supported by the Router).
Cổng vào - The port or port range used by the remote system when it responds to the
outgoing request. A response using one of these ports will be forwarded to the PC which
triggered this rule. You can input at most 5 groups of ports (or port sections). Every group of
ports must be separated with ",", for example, 2000-2038, 2046, 2050-2051, 2085,
3010-3030.
Giao thức vào - The protocol used for Cổng vào, either TCP, UDP, or Tất cả (all protocols
supported by the Router).
Trạng thái - The status of this entry, Enabled means the Port Triggering entry is enabled.
Tùy chỉnh - To modify or delete an existing entry.
Ứng dụng phổ biến - Some popular applications already listed in the drop-down list of Giao
thức vào.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Tùy chỉnh or Xóa as desired on the Tùy chỉnh column.
Click the Kích hoạt tất cả button to make all entries enabled.
Click the Vô hiệu hóa tất cả button to make all entries disabled.
Click the Xóa tất cả button to delete all entries
Once the Router is configured, the operation is as follows:
1. A local host makes an outgoing connection to an external host using a destination port
number defined in the Cổng kích hoạt field.
2. The Router records this connection, opens the incoming port or ports associated with this
Figure 4-33 Add or Modify a Triggering Entry
-51-
TL-WR740N 150Mbps Wireless N Router