Supero SuperWorkstation 7046A-3 User Manual page 38

S W
uper orkstation 7046A-3/7046A-T User's Manual
1. After removing the plastic cap,
using your thumb and the index
fi nger, hold the CPU at the north
and south center edges.
2. Align the CPU key (the semi-circle
cutout) against the socket key (the
notch below the gold color dot on
the side of the socket).
3. Once both the CPU and the socket
are aligned, carefully lower the
CPU straight down into the socket.
(Do not rub the CPU against the
surface of the socket or its pins to
avoid damaging the CPU or the
socket.)
4. With the CPU inside the socket, in-
spect the four corners of the CPU
to make sure that it is properly
installed.
5. Once the CPU is securely seated
in the socket, lower the CPU load
plate to the socket.
6. Use your thumb to gently push the
socket clip down to the clip lock.
Warning: Please save the plastic cap. The serverboard must be shipped
with the plastic cap properly installed to protect the CPU socket pins.
!
Shipment without the plastic cap properly installed will cause damage
to the socket pins.
Load Plate
5-6
CPU
CPU Socket