Manual Sheet Feeding - Star LC-7211 User Manual

Manual sheet feeding

You can use the following procedure to manually feed cut-sheet paper into the
printer.
Make sure that there is no fanfold paper in the printer. If there is, use the
procedure under "Parking fanfold paper" on page 14 to park the fanfold
paper and prepare for manual sheet feeding.
Set the release lever on the back of the printer to the cut-sheet position.
Fanfold
Cut-sheet
Set the adjustment lever to the value that matches the thickness of the paper
you are using. The setting for normal paper is 1. Set the lever to a larger
value for thicker paper, or to a smaller value for thinner paper.
Manual sheet feeding
Release lever
7
5
3
1
59