Working Instruction, Mechanical
4.1.3 Hinge Assembly Installation to Rear Frame
Plug the hinge flex connector into the socket on the PC
board.
Lay the hinge assembly on top of the frame
Press the end of the hinge assembly that contains the
microphone into the rear frame.
NOTE: MAKE SURE THE MICROPHONE FLEX IS
UNDER THE TABS OF THE ANTENNA PLASTIC.
Snap the tab on one side of the frame in the slot on the
hinge.
3/000 21-1/FEA 209 544/603 C
57(71)
©
Sony Ericsson Mobile Communications AB