Working Instruction, Mechanical
3.20 Receiver and Gasket
Removal
Perform sections 2.1.1-2.1.7 of the disassembly procedure
Perform the removal portion of the Volume Key
Replacement procedure
Perform the removal portion of the Bonzer Flex
Replacement procedure
Push the receiver and gasket out of the cavity on the front
frame.
Separate the receiver and the gasket.
Installation
Insert the receiver into the receiver gasket.
Insert the receiver/gasket assembly into the cavity on the
front frame.
Perform the installation portion of the Bonzer Flex
Replacement procedure
Perform the installation portion of the Volume Key
Replacement procedure
Perform the reassembly procedure starting at section 4.1.7
3/000 21-1/FEA 209 544/603 C
48(71)
©
Sony Ericsson Mobile Communications AB