Working Instruction, Mechanical
3.15 Microphone
Removal
Remove the Chin Cover and Microphone Gasket as shown
in section 2.1.10 of the Disassembly procedure.
Perform the removal portion of the Keypad Replacement
procedure
Insert a plectrum between the microphone and the flex.
Hold the flex with one finger while working the microphone
pins out of the holes.
NOTE: LIMIT THE AMOUNT OF STRESS ON THE
KEYPAD FLEX WHEN REMOVING THE MICROPHONE.
Installation
Orient the microphone so the pins are toward the phone
and the side of the microphone that its contact pins are
closest too is toward the keypad dome foil.
Insert the pins into the holes.
3/000 21-1/FEA 209 544/603 C
45(71)
©
Sony Ericsson Mobile Communications AB