Working Instruction, Mechanical
3.25 Wear Strips
Removal
Perform sections 2.1.1-2.1.11 of the disassembly
procedure
NOTE: DO NOT REUSE WEAR STRIPS!
Grip the curved end of the wear strip.
Pull the strip off the hinge assembly.
Installation
NOTE: THE CURVED END OF THE WEAR STRIPS GO
TOWARDS THE END OF THE HINGE ASSEMBLY
WHERE THE MICROPHONE IS LOCATED!
NOTE: THERE IS A LEFT SIDE WEAR STRIP AND A
RIGHT SIDE WEAR STRIP.
Align the tabs on the hinge assembly with the holes in the
wear strip.
Snap the wear strip onto the hinge assembly.
Perform the reassembly procedure starting at section 4.1.3
3/000 21-1/FEA 209 544/603 C
52(71)
©
Sony Ericsson Mobile Communications AB