Working Instruction, Mechanical
4.1.2 PC Board and Antenna Installation
Insert the side of the PC board with the system connector
into place under the Bluetooth antenna.
NOTE: THERE IS A SLOT IN THE EDGE OF THE REAR
FRAME IN WHICH THE SYSTEM CONNECTOR SITS.
Position the coaxial cable so that it passes through the hole
formed between the notch in the circuit board and the rear
frame.
Work the side of the circuit board opposite the system
connector into the rear frame by pulling the portion of the
rear frame indicated away for the circuit board so that the
two snaps clear the board's edge.
NOTE: THE TWO SNAPS SHOULD REST AGAINST ITS
SIM CONNECTOR SIDE OF THE CIRCUIT BOARD.
3/000 21-1/FEA 209 544/603 C
55(71)
©
Sony Ericsson Mobile Communications AB